For a typical open top grain (dump) truck, Protect-It® can be applied by evenly spreading the material over the surface of the grain mass and then raking it in to prevent it from blowing away. As the grain is dumped from the truck and is conveyed into the bin, the Protect-It® mixes well with the grain.
Where wind is not a factor, a variation on the above method is to apply the required amount of Protect-It® to the grain surface in a ‘V’ pattern. the apex of the ‘V’ is at the chute with the ends of the V at the sidewalls about 1/3 the length of the truck box from the back of the box (see diagram). Mixing of Protect-It® and grain takes place, as the grain is dumped and conveyed into storage.